Archive for the ‘design’ Category
So I have been, comparatively, out of commision to a large extent the last two years. Work and getting a graduate degree took precedence over life, liberty, pursuit of happiness, and all that jazz. Here is what I did in the last week and two modular instructions for units I did (sometime in the last several years, probably more recently, but memory is a fallible, short-term, gnat like thing for me) no guarantees they are not redundant.
Flower Instructions, great video instructions for Sun Dial (not mine), Centerfold Pictures, New Curvy Bits-“Merged Curves”
Flower instructions video I made.
The flower combines some aspects of two flowers (one of which is the Lotus flower) and another I think I’ve seen and then modifies and shapes the product. http://www.youtube.com/watch?v=r5eeJScdEQ4
Video instructions for the Sun Dial I originally posted pictoral instructions for were made and posted here http://oqueemeuenosso.blogspot.com/2010/08/origami-modular-relogio-do-sol-sun-dial.html The blog is also great to check out; it has great links and instructions. It is very well done and I always appreciate people making instructions since mine tend to be minimalistic. The blog were it is posted http://oqueemeuenosso.blogspot.com/ .
Centerfold-The organizers really worked hard and so many people praised the bag it wasn’t even funny. So thanks to everyone who is willing to put in the work. Positives-I liked the lack of ticketing, but that may just be personal preference. The hotel let the rooms be used later than initially indicated. The bar was great, drinkable coffee a dollar and if you wanted it with a bit of chemical happiness that was very reasonable. The DJ in the bar was great. They organized shuttles to the exhibit. Negatives-Just the smells in the hotel, it was not clean the smell of stale cigarette smell was overwhelming, but I also am hypersensitive to these things. Indiana reststops scare me I actually took photos in a stall just so I’d have proof of the stuff I saw etched into the stall walls and door. So a thank you to everyone that ran it, I know it’s a boatload of work. To the people I met-you were wonderful, keep playing around. To everyone I should have met but didn’t, hopefully I will some you at some future time. Shar’s presentation of some 5OSME slides reminded James and I how awesome that was. There was a lot of 5OSME people there. The guests were Robert Lang, Tomoko Fuse, and David Brill. Took a cat class with David. Missed Tomoko and Langs classes cause I can’t tell time.
Here are where the Centerfold photos start http://www.flickr.com/photos/christine42/4922078643/
Finally these are some of the curved pieces I’ve been working on. Getting larger is an ongoing challenge of mine, as is thinking of making things decent for display instead of everything being tests and getting distracted by the next shiny idea.
So for some stuff for Singapore I’ve been playing with Sine Curves and this is some of the stuff that are outshoots of that. So the paper I was working on was on rotation and compression limitation of curved corrugations and these are the tests. Eventually I will do a post on the results, but there is still a ton to do.
Where they rotate through has a big difference on the degrees of rotation. I call it spine one and spine two. Spine two goes through the maximum of a spine curve and can be rotated a lot more. The corrugation below is using spine two.
It’s really hard to see but this had some great textural and rotational properties that got me all excited, that and I wanted a choker and matching bracelet out of copper.
Standard disclaimer: The simpler the unit the more likely it’s been done before, please post information and links if you’ve seen it, done it, or something very similar. Creative commons applies to all and have a happy new year.
1. Fold in half. 2. flip over and fold bottom edge to center, same on top. 3. What it should look like.
4. Fold quarter fold to center repeat on top 5. Vertical view. 6. Side view.
7, 8. Fold bottom edge to right edge and then bottom edge to left edge. 9. Collapse to a waterbomb. Repeat on other side.
10. Fold in half to the smooth sides of the two waterbombs meet. Refer to picture 11. that is the final unit
I recommend the 12 or 30 unit first as they are easier to assemble. Refer to picks for connections at each vertex. The twelve unit is functionally a cube and the 30 unit a dodecahedron.
Happy holidays from sock monkey.
For people who have sent requests for things I apologize as I spent the better part of the last three weeks away from home and if it is for computer based candy container diagrams my other computer is not functioning right now. I will send stuff when I have the computer up and running.
As usual if anyone has seen this modular please post information and links as applicable. The unit was designed to create the same effect (although with a completely seperate unit) that another 3d wreath has. The units are not remotely similar, and sadly my unit does not have the flexibility or strength that the other one has. The modular can be done in 8 or 20 depending on the variation, of which there are many. The instructions are for the 20 unit variation. As for the oddly bolded sections that is something the blog is doing and I can’t fix-since wordpress is free I can’t complain.
2. Fold as indicated and crease and then undo.
3. Fold the bottom right edge to crease line
4. Fold tips around edge and tuck them inside.
5. Take top point and fold to bottom point and crease.
6. Take the two flaps folded in the last step and fold inside the pocket. You will have to reverse the direction of the crease on the front fold.
7. Put the unit sideways and fold the tip so it is roughly parallel with the vertex of the obtuse angle. Do it one and then rotate the unit and do it the other way.
8. Finished unit, make twenty total
9. Tuck in as indicated. Make sure that you are tucked in on both sides.
10. Keep adding units until you have the original photo.
Some fun sites.
Lately, amongst other things, I’ve been playing with pleated structures. This post is to help, me more than anything else, think about the differences, similarities, and pros/cons of different types of pleating techniques.
Paul Jackson is one of the earlier artists to work with pleating. His pleated pieces are pleated (I believe) all in one direction than the other. He then uses the additional paper pleats to pull them apart creating a curve. The curve is not inherent in the pleating as in Goran Konjevod’s technique. Paul Jackson’s website is http://www.origami-artist.com/ which has galleries and a lot of great pages to find out about him and his work. Also different is that Jackson doesn’t constrain the edges. The pulling apart of the pleats is the essence of the form and the direction they are pulled in decides the finished pieces form. One of the most beautiful aspects (to me) of his work is his coloring of his pieces. I highly recommend that you look at his coloring, because the depth that it adds to the forms is amazing. The bowl in the center is probably my favorite as the center shows the most delicious shading. The third piece wouldn’t surprise you if you stumbled upon it in a thicket. His work is varied and doesn’t stop with pleated structures so going through his site you’ll see commercial work, paper engineering, crumpling and more.
Goran is known for his fantasitical explorations of pleated structures. His designs and curves come from the interacting of the pleat layers. The way the layers interact are forcing curvature. Different pleat orders create different curves. His dense pleated structures are mathematical jems as well as artistic expressions. There are an infinite number of pleating combinations and consequently an infinitely huge pleated playground. Another difference between a lot of his works is the constraint of the edges, although this isn’t present in all it is present in most.
So in the prior post one of the main differences is the constraining of the edges. The goal is not to have the whole form curve around itself. but imagine the curves are more akin to the modification of the pleats of Eric Gjerde’s Arabesque, especially for the silver piece. “Mother and Child” is most similar to Jackson’s work in the method of curvature. Constraining edges has drawbacks in nature the solid constrained edge wouldn’t be seen, but most problematic is the tension on the edges. Short of elephant hide you are likely to rip paper with the tension.
His webite is http://www.organicorigami.com and is a great place to look at his wonderful explorations.
The thing I first did once I played with a bowl he taught was to pull it apart from the bottom, which to be honest is what I pretty much do to everything.
It can be done for space, as above, or aesthetic as below.
One of the cons of pleated structures is lost volume. Deconstructing allows you to reclaim a certain amount of space that is traditionally lost in pleated structures/containers. Of course like many things you are trading one pro for a con. When not deconstructing structures they tend to be very strong and dense. When you deconstruct the inside you end up with only one layer of paper and it is noticably less dense than the rest of the structure.
Another modification that I started playing with (and I’m glad Goran is playing with) is edge expansion. This is where all the pleats along an edge are pulled apart, you can also think of inner creases as an edge and expand them.
These two pieces combines some deconstruction and edge expansion.
One of the pros to this action is the very organic nature that it imparts to a piece, but like before when pulling apart edges it affects other nearby pleats and does weaken the overall structure. If rigidity is desired this technique is not ideal.
Probably one of my favorite modifications is the addition to traditional pleating identifiable centers that are done with initial flattened box pleating that is then shaped as desired. It gives you more opportunities to create combined pieced. A limitation is the creasing of the pleats and thickness becomes an issue the more complex the internal structure.
Future explorations involve pleating structures that arn’t 90 degree based like. In other words types of radial pleating. Another variant is only pleating certain quadrants of a piece of paper like outer corners and not doing the centers: Con: Doesn’t follow traditional pleat lines and is a pain in the bum.
I hope this helps anyone who likes to play with pleated structures and if not oh well. It is a fascinating part of paper art that can give structures that are organic and beautiful and I am happy that people like Paul Jackson and Goran Konjevod are doing/have done such nifty things.
Been playing around with pleating. Constraining pleats all in one direction than another by folding over. This unlike my earlier silver work is really related to Paul Jackson’s pleating technique. I hope to soon create a bunch of curved pieces and attach them to each other with fishing wire. I hope to create an insanely organic sealife inspired piece. I would work with one piece, but the problem is size the largest sheets of wyndstone become tiny when pleating and so you can work with a 4+ foot long piece of paper and end up with a finished piece that is less than a foot when curving. This piece I called “Mother and Child.”
The piece that looks similar but is different in how pleats actually are spreading is different. “Seasick in Silver”
What I played with during siesta time in Granada.
GRANADA, the ALHAMBRA, and LACK OF LUGGAGE/CAMERA FAILURE/SICKNESS
The trip to Spain gets a 2 while Granada gets a 10/10 and was the most amazing structure I have ever seen (it just eeks out the Eiffel Tower, although that is still another structure every human should see). The trip itself gets a two as I didn’t have luggage for 60% of my trip and let me tell you that shopping for fat girl clothes in Granada is one of the lower rungs of hell, also camera failure and severe sickness/pain on the way home sucked. Granada itself is a maze of tiny streets and cobblestone (in the old part of the city). Downtown different streets had different lighted designs or chandeliers and was an explosion of activity at night, when darkness fell. I used industrial strength sun block which was like grease paint. Gelato shops were on every corner it seemed, and I highly recommend pistachio or lemon. The dried ham in the region is intensely flavorful, but is very hard to chew. I didn’t eat out much, one meal a day, as I had breakfast at the hotel I stayed at, and skipped lunch or had fruit. Hotel Mate Leo is a great place to stay. I was on the fifth floor and highly enjoyed my stay. The receptionists were all very helpful and several called and tried to help me with my luggage travails. In fact I didn’t ask them, they volunteered. For the price and location (dead center) I loved the place and will go back again. I realize that July is not considered a great season to visit, but I found the heat bearable since it was a dry heat. The piece de resistance is the Alhambra a complex that is made up of the old fortress, Nasrid Palace, and the Generalife. The fortress is amazing and the oldest of the three, boggling the mind that it is still standing after so many years. The Generalife had gardens that bring tears to the eyes and don’t miss the water escalator, which is stairs with cold water running down troughs on either side . The most amazing and most visited structure is Nasrid palace. I won’t bother to describe it in detail as I am still viklempt just thinking about it, but I will say it is patterns everywhere and every time you think they have reached the apex of human design, you go into another room that leaves you breathless and speachless. It was humbling and worth every walk up the hill (you can take a bus, but I recommend the hill.) It was in every aspect beautiful and compelling and I hope you have a chance to visit.
Made an instructable for one of the containers
So I reverse engineered a box for a friend that has the origins listed as a Japanese Anemone box that Christiane recognized as similar to a Fujimoto box. They are all variations on a theme. So I decided to play with curvature on these boxes and the results are below along with nondirectional crease patterns. What was so interesting is that a slight change with where the curvature is makes a large difference in the end product. So everything is creative commons on this site as always. Hope you enjoy. If you would like the viacad or adobe illustrator files email me and I can send them so you can tweak the design yourself. Remember playing with a design is half the fun.
This particular design is reminiscent of the collapsible lids. I also employed these nibs in a box I did awhile back.